Top of the page

SKAARHOJ SDI-B4 Link

SDI-B4-LINK-V1 Extracts iris information from 3G-SDI input signal according to Blackmagic Designs Camera Description of Product Extracts iris information from 3G-SDI input signal according to Blackmagic Designs Camera Control Protocol. Outputs analog B4 lens iris control (Hirose- 12), tally LED and
Price €1015.19
incl. tax
Loading

Description

SDI-B4-LINK-V1

Extracts iris information from 3G-SDI input signal according to Blackmagic Designs Camera

Description of Product

Extracts iris information from 3G-SDI input signal according to Blackmagic Designs Camera Control Protocol. Outputs analog B4 lens iris control (Hirose- 12), tally LED and relay. Supports camera 1-10 by multi-position switch. SDI input passed through on SDI out. 

Completely self contained unit - runs independently. Durable enclosure with blue anodized aluminum plates 

 

Camera Support

The Blackmagic 3G-SDI Arduino Shield supports the following formats using SDI Level B: 720p50, 720p59.94, 720p60, 1080i50, 1080i59.94, 1080i60, 1080p23.98, 1080p24, 1080p25, 1080p29.97, 1080p30, 1080p50 (output only), 1080p59.94 (output only) and 1080p60 (output only), but the camera doesn´t have to be running the same video format as the program input, so you can use cameras in Ultra HD while the camera protocol is sent over HD signal to the camera. 

Outstanding differences from previous or similar versions

The SDI B4 Link converts the format from SDI to B4 equipped broadcast lenses

 

Features

  • Principle sketch for setup with the SDI-B4 Link
  • Control iris on analog B4 lens
  • Hirose 12-pin connector
  • Preview/program tally on small LED
  • Set camera number via selector switch
  • Program tally from 3-pin phoenix connector: Ground, IO, 12V (VIN)
  • Test mode for iris and program tally
  • Iris lens calibration feature
  • Compatible with Studio Camera series and URSA Mini (+Pro)
  • The Hirose 12pin connector supports most B4 lenses, but it’s your own responsibility to check that your particular lens has the features described below. Two example pin outs are given to the left from manuals for cameras and lenses, so you should be able to look up and check similar information for your lens.

 

The SKAARHOJ SDI-B4 Link will:

  • Pass on the DC 12V input to the lens with GND going to pin 3 and 12V going to pin 6
  • Adjust the lens iris with an analog value between 2.5 and 7.5V going out on pin 5 (output to lens)
  • Read back the iris position as an analog value from pin 7 (input from lens)
  • Enable iris adjustment from the B4 Link box by pulling pin 6 to 5V through a 10 K resistor. To turn of iris adjustment, it will short pin 6 to ground
  • Notice: The lens may have a “Manual / Auto” button which must typically be in Manual for this to work. In auto you may find that the lens always adjusts the iris to whatever value it receives from the B4 link box
  • Please be aware you might expect vignetting depending on your lens, the sensor size and the type of mount adaptor used. SKAARHOJ takes no responsibility in this regard. Check with your camera/lens supplier.

Specifications

Brand
Skaarhoj
Product
SDI-B4-LINK-V1
Product Category
Zoom & Focus Control
Product colour
Blue
EAN
5714074002444

SKAARHOJ SDI-B4 Link

SDI-B4-LINK-V1 Extracts iris information from 3G-SDI input signal according to Blackmagic Designs Camera Description of Product Extracts iris information from 3G-SDI input signal according to Blackmagic Designs Camera Control Protocol. Outputs analog B4 lens iris control (Hirose- 12), tally LED and
Price €1015.19
incl. tax
Loading

Description

SDI-B4-LINK-V1

Extracts iris information from 3G-SDI input signal according to Blackmagic Designs Camera

Description of Product

Extracts iris information from 3G-SDI input signal according to Blackmagic Designs Camera Control Protocol. Outputs analog B4 lens iris control (Hirose- 12), tally LED and relay. Supports camera 1-10 by multi-position switch. SDI input passed through on SDI out. 

Completely self contained unit - runs independently. Durable enclosure with blue anodized aluminum plates 

 

Camera Support

The Blackmagic 3G-SDI Arduino Shield supports the following formats using SDI Level B: 720p50, 720p59.94, 720p60, 1080i50, 1080i59.94, 1080i60, 1080p23.98, 1080p24, 1080p25, 1080p29.97, 1080p30, 1080p50 (output only), 1080p59.94 (output only) and 1080p60 (output only), but the camera doesn´t have to be running the same video format as the program input, so you can use cameras in Ultra HD while the camera protocol is sent over HD signal to the camera. 

Outstanding differences from previous or similar versions

The SDI B4 Link converts the format from SDI to B4 equipped broadcast lenses

 

Features

  • Principle sketch for setup with the SDI-B4 Link
  • Control iris on analog B4 lens
  • Hirose 12-pin connector
  • Preview/program tally on small LED
  • Set camera number via selector switch
  • Program tally from 3-pin phoenix connector: Ground, IO, 12V (VIN)
  • Test mode for iris and program tally
  • Iris lens calibration feature
  • Compatible with Studio Camera series and URSA Mini (+Pro)
  • The Hirose 12pin connector supports most B4 lenses, but it’s your own responsibility to check that your particular lens has the features described below. Two example pin outs are given to the left from manuals for cameras and lenses, so you should be able to look up and check similar information for your lens.

 

The SKAARHOJ SDI-B4 Link will:

  • Pass on the DC 12V input to the lens with GND going to pin 3 and 12V going to pin 6
  • Adjust the lens iris with an analog value between 2.5 and 7.5V going out on pin 5 (output to lens)
  • Read back the iris position as an analog value from pin 7 (input from lens)
  • Enable iris adjustment from the B4 Link box by pulling pin 6 to 5V through a 10 K resistor. To turn of iris adjustment, it will short pin 6 to ground
  • Notice: The lens may have a “Manual / Auto” button which must typically be in Manual for this to work. In auto you may find that the lens always adjusts the iris to whatever value it receives from the B4 link box
  • Please be aware you might expect vignetting depending on your lens, the sensor size and the type of mount adaptor used. SKAARHOJ takes no responsibility in this regard. Check with your camera/lens supplier.

Specifications

Brand
Skaarhoj
Product
SDI-B4-LINK-V1
Product Category
Zoom & Focus Control
Product colour
Blue
EAN
5714074002444

Newsletter

Subscribe to our newsletter:

DigiNet NV/SA 
Aarschotsestraat 87A
1800 Vilvoorde - Belgium
T +32 2 257 01 81 - VAT BE 0458 002 128
DigiNet BV 
De Boomgaard 11-12
1243HV 's-Graveland - The Netherlands
T +31 35 887 80 71 - VAT NL 8520 38 021 B01

© Copyright 2024 DigiNet. All rights reserved. Powered by Sana Commerce.

DigiNet NV/SA - Aarschotsestraat 87A - 1800 Vilvoorde - Belgium
T +32 2 257 01 81 - VAT BE 0458 002 128
DigiNet BV - De Boomgaard 11-12 - 1243HV 's-Graveland - The Netherlands
T +31 35 887 80 71 - VAT NL 8520 38 021 B01

Newsletter

Subscribe to our newsletter:

Bancontact Ideal Mastercard Visa

© Copyright 2024 DigiNet. All rights reserved. Powered by Sana Commerce.