Top of the page

MIDDLE ATLANTIC 21Sp/17D Wallrack Black

EIA compliant 19” wall mount rack shall be Middle Atlantic Products model # DWR-21-17. Overall dimensions shall be 23.4" W x 43-3/4" H x 17.3" D. Weight capacity shall be 250 lbs. Tool-Free Quick-Mount™ system enables one-person installation. Useable depth shall be 15” and shall extend into the back
Suggested Retail Price €1304.38
Retail discount 20%
Price €1043.504
incl. tax
Loading

Description

EIA compliant 19” wall mount rack shall be Middle Atlantic Products model # DWR-21-17. Overall dimensions shall be 23.4" W x 43-3/4" H x 17.3" D. Weight capacity shall be 250 lbs. Tool-Free Quick-Mount™ system enables one-person installation. Useable depth shall be 15” and shall extend into the back pan 3.5”. Center section and back pan shall be 16-gauge steel, phosphate pre-treated and finished in a black textured powder coat. Rackrail shall be constructed of 11-gauge steel with tapped 10-32 mounting holes in universal EIA spacing with black e-coat finish and marked rackspaces. Rack shall be constructed to swing open for component cabling access, center section shall pivot for either left or right opening. Rack shall have a rear knockout panel with 1/2”, 3/4”, 1", 1-1/2”, 2” and 3” electrical knockouts installed in base, and a rear knockout panel with 1/2”, 3/4”, 1”, 1-1/2”, 2” and 3” electrical knockouts, four Decora® cutouts, and BNC knockouts for UHF/VHF antennas installed in top. Large laser knockout on back pan shall have a 12-1/2” x 12-1/2” cutout for electrical pull-box. Fan knockouts on top and bottom shall allow for installation of up to four 4-1/2" fans. Rack shall have 2” knockouts, 4” knockouts for Wiremold 4000® Series raceways, and knockouts for UCP Series universal connector panels on the side. Top, bottom and sides shall feature vertical vent pattern. DWR Series enclosures shall satisfy the 2007 & 2010 CBC; 2006, 2009 & 2012 IBC; ASCE 7-05 (2005 Edition) & ASCE 7-10 (2010 Edition) and the 2006 & 2009 editions of NFPA 5000 for use in areas of high seismicity, Seismic Use Group III, Zone 4 or Seismic Design Category (SDC) “D” with lateral force requirements for protecting 140 lbs. of essential equipment in locations with the highest level of seismicity and top floor or rooftop installations with an Importance factor (Ip) of 1.5 when used with DWRSR-ZL Latch. Rack shall be UL Listed in the US and Canada. Rack shall be GREENGUARD Indoor Air Quality Certified for Children and Schools. Rack shall comply with the requirements RoHS EU Directive 2002 / 95 / EC. Rack shall be manufactured by an ISO 9001 and ISO 14001 registered company. Rack shall be warrantied to be free from defects in materials or workmanship under normal use and conditions for the lifetime of the rack.

Specifications

Brand
Middle Atlantic
Product
DWR-21-17
Product Category
Wall & Table Racks
Depth (mm)
439.4
Height (mm)
1111.3
Width (mm)
594.4
Material
Steel
Maximum weight capacity (kg)
113
Number of units (U)
21
Product colour
Black
Rack capacity
21U
EAN
656747005411

MIDDLE ATLANTIC 21Sp/17D Wallrack Black

EIA compliant 19” wall mount rack shall be Middle Atlantic Products model # DWR-21-17. Overall dimensions shall be 23.4" W x 43-3/4" H x 17.3" D. Weight capacity shall be 250 lbs. Tool-Free Quick-Mount™ system enables one-person installation. Useable depth shall be 15” and shall extend into the back
Suggested Retail Price €1304.38
Retail discount 20%
Price €1043.504
incl. tax
Loading

Description

EIA compliant 19” wall mount rack shall be Middle Atlantic Products model # DWR-21-17. Overall dimensions shall be 23.4" W x 43-3/4" H x 17.3" D. Weight capacity shall be 250 lbs. Tool-Free Quick-Mount™ system enables one-person installation. Useable depth shall be 15” and shall extend into the back pan 3.5”. Center section and back pan shall be 16-gauge steel, phosphate pre-treated and finished in a black textured powder coat. Rackrail shall be constructed of 11-gauge steel with tapped 10-32 mounting holes in universal EIA spacing with black e-coat finish and marked rackspaces. Rack shall be constructed to swing open for component cabling access, center section shall pivot for either left or right opening. Rack shall have a rear knockout panel with 1/2”, 3/4”, 1", 1-1/2”, 2” and 3” electrical knockouts installed in base, and a rear knockout panel with 1/2”, 3/4”, 1”, 1-1/2”, 2” and 3” electrical knockouts, four Decora® cutouts, and BNC knockouts for UHF/VHF antennas installed in top. Large laser knockout on back pan shall have a 12-1/2” x 12-1/2” cutout for electrical pull-box. Fan knockouts on top and bottom shall allow for installation of up to four 4-1/2" fans. Rack shall have 2” knockouts, 4” knockouts for Wiremold 4000® Series raceways, and knockouts for UCP Series universal connector panels on the side. Top, bottom and sides shall feature vertical vent pattern. DWR Series enclosures shall satisfy the 2007 & 2010 CBC; 2006, 2009 & 2012 IBC; ASCE 7-05 (2005 Edition) & ASCE 7-10 (2010 Edition) and the 2006 & 2009 editions of NFPA 5000 for use in areas of high seismicity, Seismic Use Group III, Zone 4 or Seismic Design Category (SDC) “D” with lateral force requirements for protecting 140 lbs. of essential equipment in locations with the highest level of seismicity and top floor or rooftop installations with an Importance factor (Ip) of 1.5 when used with DWRSR-ZL Latch. Rack shall be UL Listed in the US and Canada. Rack shall be GREENGUARD Indoor Air Quality Certified for Children and Schools. Rack shall comply with the requirements RoHS EU Directive 2002 / 95 / EC. Rack shall be manufactured by an ISO 9001 and ISO 14001 registered company. Rack shall be warrantied to be free from defects in materials or workmanship under normal use and conditions for the lifetime of the rack.

Specifications

Brand
Middle Atlantic
Product
DWR-21-17
Product Category
Wall & Table Racks
Depth (mm)
439.4
Height (mm)
1111.3
Width (mm)
594.4
Material
Steel
Maximum weight capacity (kg)
113
Number of units (U)
21
Product colour
Black
Rack capacity
21U
EAN
656747005411

Newsletter

Subscribe to our newsletter:

DigiNet NV/SA 
Aarschotsestraat 87A
1800 Vilvoorde - Belgium
T +32 2 257 01 81 - VAT BE 0458 002 128
DigiNet BV 
De Boomgaard 11-12
1243HV 's-Graveland - The Netherlands
T +31 35 887 80 71 - VAT NL 8520 38 021 B01

© Copyright 2024 DigiNet. All rights reserved. Powered by Sana Commerce.

DigiNet NV/SA - Aarschotsestraat 87A - 1800 Vilvoorde - Belgium
T +32 2 257 01 81 - VAT BE 0458 002 128
DigiNet BV - De Boomgaard 11-12 - 1243HV 's-Graveland - The Netherlands
T +31 35 887 80 71 - VAT NL 8520 38 021 B01

Newsletter

Subscribe to our newsletter:

Bancontact Ideal Mastercard Visa

© Copyright 2024 DigiNet. All rights reserved. Powered by Sana Commerce.