Flexible. Adaptable. Future Proof.

The iAM-12G-SDI is a powerful video and audio monitor, suited to a variety of broadcast, corporate and other professional environments.  It includes two 4K / 12G SDI inputs on BNC.  As an upgrade option, our Dolby® ATMOS option (including Dolby® D, Dolby® D+, and Dolby® E) enables decoding of Atmos content from either SDI or AES3.  But don’t worry, Dolby® D, Dolby® D+, and Dolby® E can also be purchased separately for a lower price.

But the future proofing doesn’t end there because the iAM-12G-SDI also allows you to monitor SMPTE 2110 and 2022-6!  Those inputs are available via 4 SFP cages.  See the table below for a complete list of upgrade options.

Even better, this unit is ALSO EASY to operate, because it incorporates the mature touch-screen features that were optimized in previous iAM Series units.  Use the included USB port to perform software upgrades, import / export of presets, and charge your devices.  In addition, Wohler is known for powerful sound output and audio reproduction.  This unit continues that tradition with high-quality front mounted speakers and sub-woofers.

Features & Benefits:

• 2 x 12G (4K) SDI inputs on BNC that also monitor 3G/HD/SD-SDI signals as well

• 4 x SFP cages allow a range of optional connectors and signal processing options that is more fully listed in the table below

• Optional Dolby® Atmos that also decodes Dolby D, D+ and E streams for playback, metering and metadata

• Touch screen front panel for easy, intuitive control

• Measure Audio Loudness using ITU-R BS.1770 pr EBU R128 standards

• Video monitoring and audio monitoring of up to 16 channels of audio from multiple sources

• Built-in speakers, headphone jack, USB and Ethernet ports

• Store and retrieve presets via USB or remote software control

• APIs for remote control

  Options:

  Option Cards for Signal I/O and/or Processing (includes hardware)
  OPT-DOLBY D/DD+/E	829167	Enables decoding and monitoring of Dolby® D, DD+, & E streams. Hardware card with software activation key.
  OPT-DOLBY ATMOS	829163	Enables monitoring of Dolby® Atmos, D, DD+ or E streams. Hardware card with software activation key.
  OPT-DANTE	829164	Enable monitoring from up to a 64 ch Dante Input. Hardware card with activation key.
  OPT-RAVENNA-64	829165	Enable monitoring from up to a 64 ch Ravenna / AES67 Input. Hardware card with activation key.
  OPT-MADI/ANLG/TOS (12G)	829168	Enables monitoring of 8 Analog channels on DB-25, an Optical TOSLINK Input, monitoring of 1 x MADI64 input via BNC, and an SFP Cage that accepts MADI Optical inputs.
  Small form-factor pluggable (SFP) Options
  SFP-2110 w/Ember+ SFP-2110 w/NMOS	829086 829086-1	SMPTE 2110 receiver, Multi-Mode 850 NM, LC (fiber) Connectors. SFP Module with software activation key.
  SFP-2022-6	829088	SMPTE 2022-6 receiver, Multi-Mode 850 NM, LC (fiber) Connectors. SFP Module with software activation key. Use emSET to configure SFP.
  SFP-2110 w/Ember+ + 2022-6 SFP-2110 w/NMOS + 2022-6	829087 829087-1	SMPTE 2110 or 2022-6 receiver, Multi-Mode 850 NM, LC (fiber) Connectors. SFP Module with software activation key. Use emSET to configure SFP.
  SFP-12G-SDI-FIBER	829160	12G, 3G/HD/SD-SDI single mode Optical LC (fiber) video receiver. SFP Module with sfw activation key. Only required if 12G-SDI input is needed via Fiber OR a 3rd 12G Input is required.
  SFP-SDI	829089	3G/HD/SD-SDI single video receiver with active loopback. HD-BNC Connectors. SFP Module with sfw activation key. Only purchase if 3rd SDI I/P is required.
  SFP-SDI-OUTPUT	829083	3G-SDI Transceiver; HD-BNC connectors; Input and output are both SDI. SDI Output is from selected source (Video output is set at 1080p60). For 12G-SDI, it may only be used as an input when used in one of the 4 SFP slots or as an output (when connected to the Output SFP cage). SFP module with software activation key.
  SFP-HDMI-OUTPUT	829155	HDMI/DVI output SFP. HDMI 2.0 Type D connector. Video output is set to 1080p60 from selected video source. Supports 2 channels of audio. SFP module with software activation key.
  SFP-MADI-MM-Fiber	829081	MADI optical fiber receiver; Multi-Mode, LC (fiber) Connectors. SFP Module with software activation key.
  SFP-MADI-SM-Fiber	829082	MADI optical fiber receiver; Single-Mode, LC (fiber) Connectors. SFP Module with software activation key.

  Signal I/O:

  SDI Inputs	2 x 12G SDI Inputs (3G/HD/SD-SDI also supported); Option: SFP-SDI (829089): 3G/HD/SD-SDI single video receiver w/ active loopback, HD-BNC
  SDI Outputs	1 x 12 SDI Output of Selected Source (3G/HD/SD-SDI also supported); Option: SFP-SDI (829089): 3G/HD/SD-SDI single video receiver w/ active loopback, HD-BNC
  SMPTE 2110 Input	SFP-2110 (829086): SMTPE 2110 receiver, Multi-Mode 850NM, LC (fiber) Connectors; SFP module with software activation key. Use emSET to configure SFP.
  SMPTE 2022 Input	SFP-2022 (829088): SMPTE 2022-6 receiver, Multi-Mode 850NM, LC (fiber) Connectors; SFP module with software activation key. Use emSET to configure SFP.
  AES3 Input	8 Channels on HD-15
  Analog Output	2 Channels of monitored output on XLR; 16 Channels on 2 x DB-25
  Fiber Input	Option: SFP-SDI-Fiber (829084): 3G/HD/SD-SDI video SFP optical input: LC (fiber) connectors; Single-Mode receiver, Medium Haul, non-MSA, no output; with software activation key
  Dolby Processing	OPT-DOLBY ATMOS (829163): Enables decoding and monitoring of Dolby ATMOS as well as D, DD+, and E Streams
  HDMI Output	Options: SFP-HDMI-Output (829155): SDI to HDMI/DVI Converter
  Data Ports	1 Ethernet port for configuration/control of unit via remote GUI