RovoRx-HDMI is an UltraHD/HD HDBaseT receiver with integrated HDMI video and audio outputs specifically designed to receive RovoCam’s output. Receive the RovoCam’s video and audio up to 100m away from the camera, and output to HDMI TVs and devices, while also providing power back to the camera. RovoRX-HDMI is also suitable for use with compatible HDBaseT 3rd party devices providing support for uncompressed video, audio, power, and control, all over a single Cat 5e/6 cable, greatly simplifying cabling and systems integration.
- 1x UltraHD/HD HDMI output
- 1x RCA stereo audio output*
- 1x USB for signal extension
- 1x RS-232 for RovoCam control or VISCA support
- 1x HDBaseT connector (RJ-45)
*RovoCam Audio is not carried over to the HDMI output on
RovoRx-HDMI, it is only output via the RCA 2 channel connection.
RovoRx-HDMI offers a lot of power for HDBaseT workflows, receiving uncompressed video and audio, offering bidirectional VISCA support and PoH for powering RovoCam, all across a single Cat 5e/6 cable. With an HDMI outpt, your options for distribution of RovoCam's UltraHD or HD imagery simplify any project's needs.
- HDBaseT (RJ-45), Analog Video reference terminating Input
- 1x HDMI 1.4 Output
- 1x RCA Stereo Output
- 1x REF In/Out
- 1x 3.5mm TRS Input for RS-232 bidirectional signals
- 1x RS232 for RovoControl software
Integrated 4K/HD Camera with HDBaseT
The RovoCam camera features an integrated HDBaseT transmitter. Not only does HDBaseT offer affordable long cable runs up to 100 meters over standard Cat 5e/6 cables, it also passes RovoCam’s gorgeous UltraHD/HD imagery, audio, control of the camera, and power to the unit.
A single Cat 5e/6 cable carries all uncompressed video, 2-Channel audio, VISCA camera control, and power for the simplest installation ever due to RovoCam’s integrated HDBaseT interface.
- 1x HDBaseT connector (RJ-45) allowing camera interaction and control, uncompressed video, audio and power all over one Cat 5e/6 cable.
- 1x 3.5mm Mic audio input
- 1x 3.5mm RS-232 input
- 1x local power connector
Simple to Install. Simple to Operate.
Note: Power and RS-232 connections on RovoCam are not needed if those functions are supplied by the HDBaseT interface.