Top of the page

LEADER 10G IP Input (Hardware Option)

IP input DESCRIPTION It corresponds to the IP signal and the video signal of the 2K video format at SMPTE ST 2022-6 (non-compression) and SMPTE 2110-20 (non-compression). LV5600-SER06 is ready for 10G/25G IP inputs. The IP transmission standards conform to SMPTE ST 2022-6/7 and SMPTE ST 2110-20/30/4
Price €12517.45
incl. tax
Loading

Description

IP input

DESCRIPTION 

  • It corresponds to the IP signal and the video signal of the 2K video format at SMPTE ST 2022-6 (non-compression) and SMPTE 2110-20 (non-compression).
    LV5600-SER06 is ready for 10G/25G IP inputs.
    The IP transmission standards conform to SMPTE ST 2022-6/7 and SMPTE ST 2110-20/30/40, and SMPTE ST 2110 streams can also decode 4K(3840×2160) streams.
  • Video analysis function
    Various types of video signals, in addition to a variety of displays such as video signal waveform displays, vector display, picture display, 5 BAR display, the CIE chromaticity diagram and CINELITEII, video signal quality (QoE) frozen frame error, black frame error, gamut error detection, etc. are equipped as standard features.
  • Audio analysis function
    The audio signals superimposed on IP signals can be displayed on a level meter.
  • Transmission quality analysis function
    Together with monitoring transmission errors such as packet loss, check sum error, packet discontinuity, the transmission quality (QoS) monitoring function such as packet jitter, which was difficult to observe by using IP, are strengthened.
  • Capture function
    A screen capture function to capture the display screen as still image data is equipped. It also has a frame capture function and can capture one frame of an active video period.
  • Time code display
    The time code superimposed on IP signals and can be displayed.
    The time code can also be used as the timestamp of the event log.
  • Redundancy System
    The apparatus support the redundancy system of SMPTE ST 2022-7 and enable checks of the signal switching display seamlessly.
  • Packet Jitter Measurement
    The apparatus measures the arrival intervals of IP stream packets and graphically display temporary fluctuations.
  • IP Packet Status Display
    The apparatus displays information, including source addresses, destination addresses, and protocols for the IP packets. They display traffic of 10G/25G Ethernet graphically, as well.
  • PTP Packet Status Display
    The apparatus graphically displays PTP time information and network delay information.
  • Conversion Output of SDI from IP
    The apparatuses converts video signals that are input in the form of IP stream into SDI and output the converted signals.
  • Packet Capture
    The apparatus captures the received IP packets and save them in the USB memory device in the form of PCAP files.
  • Packet Header Analysis
    The apparatus displays the packet header information of selected streams.
  • Display of Delay for Each Port
    The apparatus displays delays in the stream conforming to SMPTE ST 2022-7 for each input port.
  • Redundancy measurement
    Display packet jitter and PTP measurement port 1 and 2 at the same time.
  • Logging by PTP timestamp
    Logging error by PTP timestamp
    Time Display by PTP time.
  • PTP information display.
    Display PTP Grand Master from PTP announce message.
  • Add payload ID when IP convert to SDI
    SDI output with Payload ID when IP convert to SDI.
    ST2110 only
  • CSV file copy of Graph data
    Can be copied graph data of packet jitter and PTP and other by CSV file.
  • Audio ANC packet jitter display
    Support packet jitter graph display for Audio and ANC.
    ST2110 only
  • Buffer measurement
    Measure CMAX and VRX value of standardized SMPTE 2110-21
    LV5600-SER06/ST2110 only
  • Support IP format
    Standard SMPTE ST 2022-6,SMPTE ST 2110-20
    Redundancy standardSMPTE ST 2022-7
    Synchronized standardPTP (SMPTE ST 2059-1/2)
    Support protocolIPv4 (Internet Protocol version 4)
     IGMPv2/v3 (Internet Group Management Protocol)
     NMOS (IS-04/05) via Ethernet
  • Input video format
    LV5600-SER05
    Standard 10G/25G SMPTE ST 2022-6,SMPTE ST 2110-20
    Video formatNon compression 1080(60,59.94,50 I/P)、720(60,59.94,50 I/P)、576(50I)、487(59.94I)、(YCbCr4:2:2/10bit)
              
    LV5600-SER06
    Standard10G/25G SMPTE ST 2022-6,SMPTE ST 2110-20,25G SMPTE ST 2110-20
    Video formatNon compression 1080(60,59.94,50 I/P)、720(60,59.94,50 I/P)、576(50I)、487(59.94I)、(YCbCr4:2:2/10bit)、4K Non compression YCbCr 4:2:2 10bit 3840×2160 60/59.94/50 /P
  • Input Audio format
    StandardSMPTE ST 2022-6,SMPTE ST 2110-30
    Sampling frequency48kHz
      
    FormatL-PCM / Dolby-E / Dolby Digital / Dolby Digital Plus
    Produce clock methodFrom Video clock.
    Synchronization conditionSynchronized with video
    IP audio 16ch maximum display

    ※L-PCM requires LV5600-SER03 option.
    ※Dolby function requires LV5600-SER03 and LV5600-SER04 options.

  • Ancillary data
    Support standardSMPTE ST 2110-40
  • LV5600-SER05
    Input connector
    Input connectorSFP+
    Port number2
    Support standard10GBASE-SR / 10G BASE-LR
  • LV5600-SER06
    Input connector
    Input portSFP+
    SFPSFP+ / SFP28
    Port number2(※)
    Support standard10GBASE-SR / 10G BASE-LR
    25GBASE-SR / 25GBASE-LR

    ※ Signal standard of Port 1 and Port 2 should be same standard.

  • Ancillary data
    Support standardSMPTE ST 2110-40

Specifications

Brand
Leader
Product
LV5600-SER05
Product Category
Waveform Monitor Accessories
Accessory Type
Software Option

LEADER 10G IP Input (Hardware Option)

IP input DESCRIPTION It corresponds to the IP signal and the video signal of the 2K video format at SMPTE ST 2022-6 (non-compression) and SMPTE 2110-20 (non-compression). LV5600-SER06 is ready for 10G/25G IP inputs. The IP transmission standards conform to SMPTE ST 2022-6/7 and SMPTE ST 2110-20/30/4
Price €12517.45
incl. tax
Loading

Description

IP input

DESCRIPTION 

  • It corresponds to the IP signal and the video signal of the 2K video format at SMPTE ST 2022-6 (non-compression) and SMPTE 2110-20 (non-compression).
    LV5600-SER06 is ready for 10G/25G IP inputs.
    The IP transmission standards conform to SMPTE ST 2022-6/7 and SMPTE ST 2110-20/30/40, and SMPTE ST 2110 streams can also decode 4K(3840×2160) streams.
  • Video analysis function
    Various types of video signals, in addition to a variety of displays such as video signal waveform displays, vector display, picture display, 5 BAR display, the CIE chromaticity diagram and CINELITEII, video signal quality (QoE) frozen frame error, black frame error, gamut error detection, etc. are equipped as standard features.
  • Audio analysis function
    The audio signals superimposed on IP signals can be displayed on a level meter.
  • Transmission quality analysis function
    Together with monitoring transmission errors such as packet loss, check sum error, packet discontinuity, the transmission quality (QoS) monitoring function such as packet jitter, which was difficult to observe by using IP, are strengthened.
  • Capture function
    A screen capture function to capture the display screen as still image data is equipped. It also has a frame capture function and can capture one frame of an active video period.
  • Time code display
    The time code superimposed on IP signals and can be displayed.
    The time code can also be used as the timestamp of the event log.
  • Redundancy System
    The apparatus support the redundancy system of SMPTE ST 2022-7 and enable checks of the signal switching display seamlessly.
  • Packet Jitter Measurement
    The apparatus measures the arrival intervals of IP stream packets and graphically display temporary fluctuations.
  • IP Packet Status Display
    The apparatus displays information, including source addresses, destination addresses, and protocols for the IP packets. They display traffic of 10G/25G Ethernet graphically, as well.
  • PTP Packet Status Display
    The apparatus graphically displays PTP time information and network delay information.
  • Conversion Output of SDI from IP
    The apparatuses converts video signals that are input in the form of IP stream into SDI and output the converted signals.
  • Packet Capture
    The apparatus captures the received IP packets and save them in the USB memory device in the form of PCAP files.
  • Packet Header Analysis
    The apparatus displays the packet header information of selected streams.
  • Display of Delay for Each Port
    The apparatus displays delays in the stream conforming to SMPTE ST 2022-7 for each input port.
  • Redundancy measurement
    Display packet jitter and PTP measurement port 1 and 2 at the same time.
  • Logging by PTP timestamp
    Logging error by PTP timestamp
    Time Display by PTP time.
  • PTP information display.
    Display PTP Grand Master from PTP announce message.
  • Add payload ID when IP convert to SDI
    SDI output with Payload ID when IP convert to SDI.
    ST2110 only
  • CSV file copy of Graph data
    Can be copied graph data of packet jitter and PTP and other by CSV file.
  • Audio ANC packet jitter display
    Support packet jitter graph display for Audio and ANC.
    ST2110 only
  • Buffer measurement
    Measure CMAX and VRX value of standardized SMPTE 2110-21
    LV5600-SER06/ST2110 only
  • Support IP format
    Standard SMPTE ST 2022-6,SMPTE ST 2110-20
    Redundancy standardSMPTE ST 2022-7
    Synchronized standardPTP (SMPTE ST 2059-1/2)
    Support protocolIPv4 (Internet Protocol version 4)
     IGMPv2/v3 (Internet Group Management Protocol)
     NMOS (IS-04/05) via Ethernet
  • Input video format
    LV5600-SER05
    Standard 10G/25G SMPTE ST 2022-6,SMPTE ST 2110-20
    Video formatNon compression 1080(60,59.94,50 I/P)、720(60,59.94,50 I/P)、576(50I)、487(59.94I)、(YCbCr4:2:2/10bit)
              
    LV5600-SER06
    Standard10G/25G SMPTE ST 2022-6,SMPTE ST 2110-20,25G SMPTE ST 2110-20
    Video formatNon compression 1080(60,59.94,50 I/P)、720(60,59.94,50 I/P)、576(50I)、487(59.94I)、(YCbCr4:2:2/10bit)、4K Non compression YCbCr 4:2:2 10bit 3840×2160 60/59.94/50 /P
  • Input Audio format
    StandardSMPTE ST 2022-6,SMPTE ST 2110-30
    Sampling frequency48kHz
      
    FormatL-PCM / Dolby-E / Dolby Digital / Dolby Digital Plus
    Produce clock methodFrom Video clock.
    Synchronization conditionSynchronized with video
    IP audio 16ch maximum display

    ※L-PCM requires LV5600-SER03 option.
    ※Dolby function requires LV5600-SER03 and LV5600-SER04 options.

  • Ancillary data
    Support standardSMPTE ST 2110-40
  • LV5600-SER05
    Input connector
    Input connectorSFP+
    Port number2
    Support standard10GBASE-SR / 10G BASE-LR
  • LV5600-SER06
    Input connector
    Input portSFP+
    SFPSFP+ / SFP28
    Port number2(※)
    Support standard10GBASE-SR / 10G BASE-LR
    25GBASE-SR / 25GBASE-LR

    ※ Signal standard of Port 1 and Port 2 should be same standard.

  • Ancillary data
    Support standardSMPTE ST 2110-40

Specifications

Brand
Leader
Product
LV5600-SER05
Product Category
Waveform Monitor Accessories
Accessory Type
Software Option

Newsletter

Subscribe to our newsletter:

DigiNet NV/SA 
Aarschotsestraat 87A
1800 Vilvoorde - Belgium
T +32 2 257 01 81 - VAT BE 0458 002 128
DigiNet BV 
De Boomgaard 11-12
1243HV 's-Graveland - The Netherlands
T +31 35 887 80 71 - VAT NL 8520 38 021 B01

© Copyright 2024 DigiNet. All rights reserved. Powered by Sana Commerce.

DigiNet NV/SA - Aarschotsestraat 87A - 1800 Vilvoorde - Belgium
T +32 2 257 01 81 - VAT BE 0458 002 128
DigiNet BV - De Boomgaard 11-12 - 1243HV 's-Graveland - The Netherlands
T +31 35 887 80 71 - VAT NL 8520 38 021 B01

Newsletter

Subscribe to our newsletter:

Bancontact Ideal Mastercard Visa

© Copyright 2024 DigiNet. All rights reserved. Powered by Sana Commerce.