LIGHTWARE DP-OPT-RX100: DisplayPort1.1 fiber optical receiver over one multimode fiber. SC optical connector, locking DC connector, Dual Mode DisplayPort - supports DVI and HDMI adaptors.
Description
Designed for use in both AV and IT applications, this DisplayPort extender pair provides extension up to 4K / UHD (30Hz RGB 4:4:4, 60Hz YCbCr 4:2:0) resolution on long 1100m distances.
DP-OPT-RX100 extends Dual-mode DisplayPort 1.1a high resolution video and embedded audio, with optional HDCP encryption, over one multimode fiber up to 1100 m.
DisplayPort is one of the newest video interface standards introduced by VESA. Using DisplayPort, high resolution video and excellent quality audio can be transmitted. The interface's 10.8 Gbps bandwidth is capable of transmitting 2560x1600@60Hz pixel resolution video with full support of content protection (HDCP, DPCP). 4Kx2K resolution can be achieved up to 30Hz frame rate.
Dual-mode DisplayPort:Â when connecting a DVI or HDMI display through an adaptor cable, Dual-mode DisplayPort graphic cards reconfigure their Outputs to DVI or HDMI accordingly. Lightware DisplayPort extenders support Dual-mode port extension and adaptor cables.
Single Fiber Technology makes these units fully DisplayPort 1.1a and HDCP 1.1 compliant without the need of a second fiber cable or copper connections. To simplify cabling, the bi-directional communication necessary for Link Training and HDCP handshaking, is performed on the same fiber core that transmits the video signal.
Galvanic isolation between source and display helps to avoid ground loops and hum effects. No delay occurs in the signal during optical conversion as the video image is transported without any frame latency.Â
Highlighted features
- Supports DisplayPort Link Training
- Compatible with Apple LED Cinema Display
- Dual-mode DP: supports DVI and HDMI adaptors
- Extends DP 1.1 signals over one multimode fiber cable
Applications
- Long distance lossless DisplayPort signal transmission
- Apple Cinema Display port extension
- Ground loop isolation
 Features
- Supports DisplayPort Link Training
- HDCP 1.4 compliant
- No signal latency, zero frame delay
- 2560x1600 maximum resolution (DP)
- Compatible with Apple LED Cinema Display
- Single Fiber Technology
- Extension distance up to 2500 meters (with OM3 fiber, 1920x1080p60)
- Dual-mode DP: supports DVI and HDMI adaptors
- Transparent EDID pass-through
- Uncompressed video up to 10.8 Gbps datarate (DP1.1)
- No video compression
- Status LEDs (fiber link, source, signal type and monitor detect)
- Twist-and-lock DC power connector
- External universal power adaptor
- Mounting options for rack, furniture or truss
- Metal enclosure
- Extends DP 1.1 signals over one multimode fiber cable
Specifications
- Brand
- Lightware
- Product
- DP-OPT-RX100
- Product Category
- Fiber Extenders
- 3D
- Y
- Audio Connectivity
- Embedded
- Data Interface
- Not Applicable
- Extender/Repeater Type
- Receivers
- Fiber optic connector
- SC
- Form factor
- Compact/DesktopRackmountable Optional
- HDCP
- Yes
- Material
- Metal
- Maximum Range
- Up to 2500m
- Maximum resolution (pixels)
- 4096 x 2400
- Over-Cable Type
- MultiMode Fiber
- Product colour
- Black
- Rack mounting
- Yes
- Signal Type
- DisplayPort
- Video Connectivity
- DisplayPort
- DC-in jack
- Yes
LIGHTWARE DP-OPT-RX100: DisplayPort1.1 fiber optical receiver over one multimode fiber. SC optical connector, locking DC connector, Dual Mode DisplayPort - supports DVI and HDMI adaptors.
Description
Designed for use in both AV and IT applications, this DisplayPort extender pair provides extension up to 4K / UHD (30Hz RGB 4:4:4, 60Hz YCbCr 4:2:0) resolution on long 1100m distances.
DP-OPT-RX100 extends Dual-mode DisplayPort 1.1a high resolution video and embedded audio, with optional HDCP encryption, over one multimode fiber up to 1100 m.
DisplayPort is one of the newest video interface standards introduced by VESA. Using DisplayPort, high resolution video and excellent quality audio can be transmitted. The interface's 10.8 Gbps bandwidth is capable of transmitting 2560x1600@60Hz pixel resolution video with full support of content protection (HDCP, DPCP). 4Kx2K resolution can be achieved up to 30Hz frame rate.
Dual-mode DisplayPort:Â when connecting a DVI or HDMI display through an adaptor cable, Dual-mode DisplayPort graphic cards reconfigure their Outputs to DVI or HDMI accordingly. Lightware DisplayPort extenders support Dual-mode port extension and adaptor cables.
Single Fiber Technology makes these units fully DisplayPort 1.1a and HDCP 1.1 compliant without the need of a second fiber cable or copper connections. To simplify cabling, the bi-directional communication necessary for Link Training and HDCP handshaking, is performed on the same fiber core that transmits the video signal.
Galvanic isolation between source and display helps to avoid ground loops and hum effects. No delay occurs in the signal during optical conversion as the video image is transported without any frame latency.Â
Highlighted features
- Supports DisplayPort Link Training
- Compatible with Apple LED Cinema Display
- Dual-mode DP: supports DVI and HDMI adaptors
- Extends DP 1.1 signals over one multimode fiber cable
Applications
- Long distance lossless DisplayPort signal transmission
- Apple Cinema Display port extension
- Ground loop isolation
 Features
- Supports DisplayPort Link Training
- HDCP 1.4 compliant
- No signal latency, zero frame delay
- 2560x1600 maximum resolution (DP)
- Compatible with Apple LED Cinema Display
- Single Fiber Technology
- Extension distance up to 2500 meters (with OM3 fiber, 1920x1080p60)
- Dual-mode DP: supports DVI and HDMI adaptors
- Transparent EDID pass-through
- Uncompressed video up to 10.8 Gbps datarate (DP1.1)
- No video compression
- Status LEDs (fiber link, source, signal type and monitor detect)
- Twist-and-lock DC power connector
- External universal power adaptor
- Mounting options for rack, furniture or truss
- Metal enclosure
- Extends DP 1.1 signals over one multimode fiber cable
Specifications
- Brand
- Lightware
- Product
- DP-OPT-RX100
- Product Category
- Fiber Extenders
- 3D
- Y
- Audio Connectivity
- Embedded
- Data Interface
- Not Applicable
- Extender/Repeater Type
- Receivers
- Fiber optic connector
- SC
- Form factor
- Compact/DesktopRackmountable Optional
- HDCP
- Yes
- Material
- Metal
- Maximum Range
- Up to 2500m
- Maximum resolution (pixels)
- 4096 x 2400
- Over-Cable Type
- MultiMode Fiber
- Product colour
- Black
- Rack mounting
- Yes
- Signal Type
- DisplayPort
- Video Connectivity
- DisplayPort
- DC-in jack
- Yes