MATROX ConvertIP (DRH)
Description
ConvertIP DRH
Dual-channel RJ45 HDMI-to-IP transmitter/receiver
Matrox ConvertIP DRH is a compact, standalone ST 2110 and IPMX transmitter/receiver device. Featuring HDMI I/O and three RJ45 ports on a single device, ConvertIP DRH is designed for 1G AV workflows and is optimal for an ultra-low latency experience. The device can deliver power over Ethernet through its RJ45 connection, or it can be powered through an optional power supply unit. Both can be used simultaneously to deliver power redundancy.
Key Features
- HDMI I/OMulti-network support
- 3x RJ45 1GÂ network support
- Fanless design for quiet cooling
- Power redundancy through PoE+ and locking AC power connector (optional power supply cable sold separately)
- Optional bracket for VESA mounting behind monitors
- Optional 1 RU rack shelf that holds two appliances
- Optional fault-tolerant, hot-swappable, and rack-mountable power supply
Benfits
- Transmit or receive signals from a single device
- Low latency with exceptional 4K image quality
- Colibri codec for high-quality transmission of compressed media
- Optional JPEG XS codec license for uncompressed media
- IPMX ready
- ConvertIP Command Center complimentary web interface for managing ConvertIP devices
- Optional Matrox ConductIP software license for discovery and routing
- Compact form factor mounts easily to the back of a monitor
Rack mountable
Install up to two ConvertIP devices horizontally on a single U of rack space. A stand-alone appliance, your ConvertIP device can be  housed in a 1U ½ rack width. And its whisper-quiet operation means that ConvertIP is made for control rooms, operation centers, and other critical environments that require a noise level of 25 dB and less.Â
Â
Always powered. Always on.
Safeguard against a potential loss of power. Matrox makes available rack-mounted, multi-output redundant power supply units (RPSU) to ensure uninterrupted operation of your Matrox device in case of a power module failure and a redundant power input in case a circuit breaker trips.
Specifications
- Brand
- Matrox
- Product
- CIP-DRH
- Product Category
- IP Converters
- AV over IP Protocol
- SMPTE 2110
- Audio Input
- 3.5mm mini jackHDMI Embedded
- Audio Output
- HDMI Embedded
- Converter Type
- IP Converters
- External power adapter
- PoE
- Features
- 4K ResolutionSMPTE ST 2110
- Form factor
- 1-RURackmountable
- Maximum resolution (pixels)
- 4096 x 2160
- Network Interface
- RJ45 x3
- USB powered
- No
- Video Input
- HDMI 2.0
- Video Output
- HDMI 2.0
- EAN
- 797525913
MATROX ConvertIP (DRH)
Description
ConvertIP DRH
Dual-channel RJ45 HDMI-to-IP transmitter/receiver
Matrox ConvertIP DRH is a compact, standalone ST 2110 and IPMX transmitter/receiver device. Featuring HDMI I/O and three RJ45 ports on a single device, ConvertIP DRH is designed for 1G AV workflows and is optimal for an ultra-low latency experience. The device can deliver power over Ethernet through its RJ45 connection, or it can be powered through an optional power supply unit. Both can be used simultaneously to deliver power redundancy.
Key Features
- HDMI I/OMulti-network support
- 3x RJ45 1GÂ network support
- Fanless design for quiet cooling
- Power redundancy through PoE+ and locking AC power connector (optional power supply cable sold separately)
- Optional bracket for VESA mounting behind monitors
- Optional 1 RU rack shelf that holds two appliances
- Optional fault-tolerant, hot-swappable, and rack-mountable power supply
Benfits
- Transmit or receive signals from a single device
- Low latency with exceptional 4K image quality
- Colibri codec for high-quality transmission of compressed media
- Optional JPEG XS codec license for uncompressed media
- IPMX ready
- ConvertIP Command Center complimentary web interface for managing ConvertIP devices
- Optional Matrox ConductIP software license for discovery and routing
- Compact form factor mounts easily to the back of a monitor
Rack mountable
Install up to two ConvertIP devices horizontally on a single U of rack space. A stand-alone appliance, your ConvertIP device can be  housed in a 1U ½ rack width. And its whisper-quiet operation means that ConvertIP is made for control rooms, operation centers, and other critical environments that require a noise level of 25 dB and less.Â
Â
Always powered. Always on.
Safeguard against a potential loss of power. Matrox makes available rack-mounted, multi-output redundant power supply units (RPSU) to ensure uninterrupted operation of your Matrox device in case of a power module failure and a redundant power input in case a circuit breaker trips.
Specifications
- Brand
- Matrox
- Product
- CIP-DRH
- Product Category
- IP Converters
- AV over IP Protocol
- SMPTE 2110
- Audio Input
- 3.5mm mini jackHDMI Embedded
- Audio Output
- HDMI Embedded
- Converter Type
- IP Converters
- External power adapter
- PoE
- Features
- 4K ResolutionSMPTE ST 2110
- Form factor
- 1-RURackmountable
- Maximum resolution (pixels)
- 4096 x 2160
- Network Interface
- RJ45 x3
- USB powered
- No
- Video Input
- HDMI 2.0
- Video Output
- HDMI 2.0
- EAN
- 797525913