MATROX ConvertIP (SRH)
Description
ConvertIP SRH
Single-channel RJ45 HDMI-to-IP transmitter/receiver
Matrox ConvertIP SRH is a compact, standalone ST 2110 and IPMX transmitter/receiver device. Featuring one RJ45 port, ConvertIP SRH is designed for 1G AV workflows and is optimal for an ultra-low latency experience. The device can deliver power over Ethernet through its RJ45 connection, or it can be powered through an optional power supply unit. Both can be used simultaneously to deliver power redundancy.
Key Features
- HDMI I/O
- Multi-network support
- 1x RJ45 1GÂ network support
- Fanless design for quiet cooling3
- Power redundancy through PoE+ and locking AC power connector (optional power supply cable sold separately)
- Optional bracket for VESA mounting behind monitors
- Optional 1 RU rack shelf that holds two appliances
- Optional fault-tolerant, hot-swappable, and rack-mountable power supply
Benefits
- Transmit or receive signals from a single device
- Low latency with exceptional 4K image quality
- Colibri codec for high-quality transmission of compressed media
- Optional JPEG XS codec license for uncompressed media
- IPMX ready
- ConvertIP Command Center complimentary web interface for managing ConvertIP devices
- Optional Matrox ConductIP software license for discovery and routing
- Compact form factor mounts easily to the back of a monitor
Â
Rack mountable
Install up to three ConvertIP devices horizontally on a single U of rack space. A stand-alone appliance, your ConvertIP device can be housed in a 1U ½ rack width. And its whisper-quiet operation means that ConvertIP is made for control rooms, operation centers, and other critical environments that require a noise level of 25 dB and less.Â
Â
Always powered. Always on.
Safeguard against a potential loss of power. Matrox makes available rack-mounted, multi-output redundant power supply units (RPSU) to ensure uninterrupted operation of your Matrox device in case of a power module failure and a redundant power input in case a circuit breaker trips.
Specifications
- Brand
- Matrox
- Product
- CIP-SRH
- Product Category
- IP Converters
- AV over IP Protocol
- SMPTE 2110
- Audio Input
- 3.5mm mini jackHDMI Embedded
- Audio Output
- HDMI Embedded
- Converter Type
- IP Converters
- External power adapter
- PoE
- Features
- 4K ResolutionSMPTE ST 2110
- Form factor
- 1-RURackmountable
- Maximum resolution (pixels)
- 4096 x 2160
- Network Interface
- RJ45 x1
- USB powered
- No
- Video Input
- HDMI 2.0
- Video Output
- HDMI 2.0
- EAN
- 7975259284
MATROX ConvertIP (SRH)
Description
ConvertIP SRH
Single-channel RJ45 HDMI-to-IP transmitter/receiver
Matrox ConvertIP SRH is a compact, standalone ST 2110 and IPMX transmitter/receiver device. Featuring one RJ45 port, ConvertIP SRH is designed for 1G AV workflows and is optimal for an ultra-low latency experience. The device can deliver power over Ethernet through its RJ45 connection, or it can be powered through an optional power supply unit. Both can be used simultaneously to deliver power redundancy.
Key Features
- HDMI I/O
- Multi-network support
- 1x RJ45 1GÂ network support
- Fanless design for quiet cooling3
- Power redundancy through PoE+ and locking AC power connector (optional power supply cable sold separately)
- Optional bracket for VESA mounting behind monitors
- Optional 1 RU rack shelf that holds two appliances
- Optional fault-tolerant, hot-swappable, and rack-mountable power supply
Benefits
- Transmit or receive signals from a single device
- Low latency with exceptional 4K image quality
- Colibri codec for high-quality transmission of compressed media
- Optional JPEG XS codec license for uncompressed media
- IPMX ready
- ConvertIP Command Center complimentary web interface for managing ConvertIP devices
- Optional Matrox ConductIP software license for discovery and routing
- Compact form factor mounts easily to the back of a monitor
Â
Rack mountable
Install up to three ConvertIP devices horizontally on a single U of rack space. A stand-alone appliance, your ConvertIP device can be housed in a 1U ½ rack width. And its whisper-quiet operation means that ConvertIP is made for control rooms, operation centers, and other critical environments that require a noise level of 25 dB and less.Â
Â
Always powered. Always on.
Safeguard against a potential loss of power. Matrox makes available rack-mounted, multi-output redundant power supply units (RPSU) to ensure uninterrupted operation of your Matrox device in case of a power module failure and a redundant power input in case a circuit breaker trips.
Specifications
- Brand
- Matrox
- Product
- CIP-SRH
- Product Category
- IP Converters
- AV over IP Protocol
- SMPTE 2110
- Audio Input
- 3.5mm mini jackHDMI Embedded
- Audio Output
- HDMI Embedded
- Converter Type
- IP Converters
- External power adapter
- PoE
- Features
- 4K ResolutionSMPTE ST 2110
- Form factor
- 1-RURackmountable
- Maximum resolution (pixels)
- 4096 x 2160
- Network Interface
- RJ45 x1
- USB powered
- No
- Video Input
- HDMI 2.0
- Video Output
- HDMI 2.0
- EAN
- 7975259284