4x2 HDMI Matrix Switcher with Breakaway Analog Audio

MMX4x2-HDMI is a uniquely mini size matrix switcher. It has four HDMI inputs and two independent HDMI outputs.

Highlighted features

• Cisco VC room integration compatibility
• Advanced control feature pack for 3rd party video conference collaboration
• Command injection on RS-232 and IR ports

MMX4x2-HDMI is a uniquely mini size matrix switcher. It has four HDMI inputs and two independent HDMI outputs. Audio can be de-embedded from the HDMI signal to a balanced 5-pole Phoenix (Euroblock) port and external audio signal can be embedded into the HDMI stream from another 5-pole Phoenix input port. The volume and gain properties of the audio signal can be modified at both input and output. The unit is fully 4K/UHD/3D capable and HDCP compliant. The device has a built-in Event Manager configurable via the Lightware Device Controller software. Further control options are served by the USB, RS-232, IR (in and out) and Ethernet ports.

  Advanced Control Pack Features:

• 100 available event slots in ’Plus’ extenders
• Support RS-232 protocol for communication and control of third party devices like VC codecs. This allows the Cisco Room Kit login on RS-232–USB connection.
• Support to receive CEC commands for control of displays and Lightware Event Manager to automate room actions.
• Support to send CEC commands on HDMI ports for control of other devices.
• Support true Infrared messages using HEX codes to control TVs, media players and other devices with IR emitters.

Key Features

• Cisco VC room integration compatibility
• Advanced control feature pack for 3rd party video conference collaboration
• 1920x1080@120Hz/4:4:4, 4096x2160@30Hz/4:4:4 or 60Hz/4:2:0 maximum resolutions (300MHz)
• Audio embedding and de-embedding
• Adjustable analog audio settings (volume, gain, balance)
• Frame Detector (analyze detailed video timings)
• Compact size
• 5-pole Phoenix balanced analog audio connectors
• Mounting options for rack, furniture or truss
• External universal power adaptor
• Twist-and-lock DC power connector
• HDCP enable/disable function on input
• 4x2 HDMI matrix switcher
• HDMI 1.4, HDCP 1.4 and DVI 1.0 compliant
• Multiple TCP/IP connections
• Advanced EDID Management
• Save and reload full crosspoint configurations as preset
• Intuitive control software for device configuration
• Front panel buttons for crosspoint control
• Device control via Ethernet (TCP/IP), RS-232 and USB
• Supports HDMI 4K signal formats (4K UHD @30Hz RGB 4:4:4 or @60Hz YUV 4:2:0, up to 9 Gbps)
• Command injection on RS-232 and IR ports
• Fully non-blocking switching architecture
• Built-in Event Manager control automation feature
• Supports HDMI 3D signal formats (frame packing, side-by-side and top-bottom)
• Pixel Accurate Reclocking
• No video compression
• HDCP 1.4 compliant
• Uncompressed video up to 9 Gbps datarate (300 MHz pixel clock)
• Cross compatible with TPS series Lightware extenders and I/O boards (HDBaseT compatible)
• Firmware upgrade through Ethernet
• Supports all embedded audio formats (including PCM, Dolby Digital and DTS high bitrate audio)
• Built-in video test pattern generator
• No signal latency, zero frame delay